Exterior Promotional Signage
Exterior banner brackets and poles for
Hotels, Conference Facilities, Department Stores, etc

Please note that prior to order you should ensure the following...

• that the structures to which you intend to affix the banner brackets will take the loading of the wind forces on the banner.

• that you use additional wire stays where necessary to increase the number of anchor points and to decrease the loading on the banner bracket and fixings.

• that you use an optional banner pole with tension adjusters where necessary to ensure that the banner remains tensioned and thus helps to prevent the banner flapping around and tugging on the banner pole and banner bracket fittings.

• that you use secure screw and plug, rawbolt, or threaded rod and nut fittings to secure the banner brackets (threaded rod fixed into brick or stone with HILTI compound is recommended for secure fixing of banner brackets for larger banner sizes).

We can not guarantee the suitability of the products for your location.  If in any doubt consult a qualified engineer to advise.

• Heavy duty wall mounted banner poles for exterior drop banners made from cloth or PVC

• Bracket plates are 300mm high x 200mm wide

• Banner poles manufactured to suit banner width

• Optional extra lower pole with banner tension adjusters ensures that the banner maintains a taught, flat appearance

• Optional stay wires and tension adjusters can be supplied for larger banners in exposed areas

• Option of plain end cap, domed end cap or gold colour finial cap

• Please contact us for prices and further details

• Heavy duty face mounted banner poles for exterior drop banners made from cloth or PVC up to 2.5 metres wide

• Bracket plates are 300mm high x 100mm wide

• Banner poles manufactured to suit banner width

• Optional extra lower pole with banner tension adjusters ensures that the banner maintains a taught, flat appearance

• Please contact us for prices and further details

Face mount brackets and poles can also be mounted at the side to display horizontal / landscape banners

We can also supply backplates for column mounting the brackets and poles to allow a horizontal banner to be displayed securely between two square profile columns

• Standard duty wall mounted banner poles for exterior drop banners made from cloth or PVC

• Suitable for banners up to 1.5 metres drop x 1.25 metres wide

• Bracket plates are 200mm diameter

• Banner poles manufactured to suit banner width

• Option of plain end cap or gold colour finial cap

• Please contact us for prices and further details

• Light duty wall mounted banner poles for exterior drop banners made from cloth or PVC

• Suitable for banners up to 4.5 metres drop x 455mm wide or 1 metre drop x 915mm wide

• Bracket plates are galvanised steel

• Banner poles manufactured to suit banner widths of 455mm, 610mm, 760mm and 915mm (pole as per light duty lamp post banner pole below)

• Please contact us for prices and further details

• Standard duty street lamp mounted banner poles for exterior drop banners made from cloth or PVC

• Suitable for banners up to 4.5 metre drop x 600mm wide or 2 metre drop x 1 metre wide

• Bracket plates are 140mm high and suitable to fit posts of 75mm to 150mm diameter

• Banner poles manufactured to suit banner width

• Please contact us for prices and further details

• Light duty street lamp mounted banner poles for exterior drop banners made from cloth or PVC

• Suitable for banners up to 4.5 metres drop x 455mm wide or 1 metre drop x 915mm wide

• Bracket plates are 140mm high and suitable to fit posts of 75mm to 150mm diameter

• Banner poles manufactured to suit banner width

• Please contact us for prices and further details